Comments on: Step by step instructions for replacing the power window motor & regulator in a Pontiac Grand Prix

By: Richard

Richard — Thu, 12 Jun 2008 10:42:54 +0000

BUT,……….A VERY CRITICAL PART WAS LEFT OUT!

No mention was made that in order to GET OUT the 2 hex screws to remove the door panel, you must (unless you have a flex screwdriver) 1st remove the door (grasp) handle (which the auther in fact did, ..it shows in the illustrations!).

No mention/or pictures of this critical removal was /were mentioned, or pictures taken!!!

By: Richard

Richard — Wed, 04 Jun 2008 00:05:33 +0000

I meant the master window switch (e.g., removing the wire connectors from the button switch itself).

By: Richard

Richard — Tue, 03 Jun 2008 23:53:24 +0000

I would have liked to have seen more details/pictures, on 1 of the major 1st steps: that being the removal of the drivers door master window switch panel.

I am NOT sure which of the ‘tabs’ are prying, & in exeactly WHAT manner, in order to remove the switch panel.

By: Michelel

Michelel — Thu, 24 Apr 2008 15:06:58 +0000

I needed this information to put in my window regulator…That I order from your company. This was really helpful. If I need future items. I will come back to your site.

Thanks..

By: Bill

Bill — Tue, 22 Apr 2008 03:38:13 +0000

I came upon your site while looking for tech info for mty 99 GTP with a slow passenger side window. I thank you for posting this info, you havwe saved me lots of frustration. Thanks!